| Product P.T Oriental Abadi Indonesia

Main Product

Miscellaneous

FLUKE

Page 4 of 6 | [1][2][3][4][5][6]

Fluke 717 and 718 Pressure Calibrators

For more information:
Click here >>

Compact, professional, pressure calibration tools

Fluke 717 30G and100G pressure calibrators

	Measure pressure and vacuum to 0,05% of full scale with internal 30 or 100 psig sensor - 1/8 NPT pressure fitting - Compatible with non-corrosive gasses and liquid
	Measure pressure to 10,000 psi/69 mPa using one of 29 fluke 70Pxx pressure modules
	Measure mA with 0,025 % accuracy and 0,001 mA resolution, while providing 24 V loop power
	Wide range of selectable measurement units for pressure
	Min/max/hold functions

Fluke 718 30G and 100G pressure calibrators

	Compact size, lightweight
	Built-in pressure/vacuum hand pump, with vernier and bleed valve
	Pressure and vacuum measurement to0,05% of full span, using an internal pressure sensor (dry air only)
	Pressure measurement to 10,000 psi/700 bar using any of 29 fluke 700Pxx pressure modules
	Wide range of selectable measurement units for pressure
	Measure mA with 0,025% accuracy and 0,001 mA resolution, while providing 24 volt loop power supply
	1/8 inc NPT female pressure fitting Min/max/hold functions

Fluke 740 Series Documenting Process Calibrators

For more information:
Click here >>

For the calibration and troubleshooting of process control instrumentation

	Calibrate temperature, pressure, voltage, current, resistance, and frequency instruments
	Built-in procedure for transmitters, square root transmitter and limit switches
	Simultaneously measure and source
	Automatically captures calibration result
	Document procedures and result to meet ISO 9000, EPA, FDA, OSHA, and other governments requirements
	Measure/simulate 11 types of thermocouples and eight RTDs
	Store up to 8,000 reading in data logging mode (743B and 744 only)
	Protected against dirt, dust, and moisture; unaffected by vibration
	Includes a PC interface (743B and 744 only)
	Operates in English, French, German, Italian, and Spanish
	Offer one and two year calibration cycles and a three year warranty (one year for pressure modules)

744: Get HART- ability

The fluke 744 offers all of the capabilities of the 743B, plus the ability to calibrate, maintain, and troubleshooting HART instrumentation. Integrated HART communication functions permit you to monitor, control, and calibrate HERT instrumentation. It handles fast pulsed instruments such as RTD transmitters and PLCs, with pulses as short as 1 ms

743:more memory, plus a PC interface and data logging

The 743B ahs all the capabilities of the741B plus a PC interface that lets you load procedures, lists, and instructions crated with software or unload data memory, the 743B can hold a full week of calibrations and procedures.

741B: A complete documenting calibrator

The 741B is the economical choice for plants that don’t use PCs or that require traditional paper forms. It has storage capacity for a day’s calibration and measurement data. When you’re back at the shop, recall the data on screen to fill out calibration forms

Fluke 725 Multifunction Process Calibrator

For more information:
Click here >>

Easy to use field calibrator with functions to test calibrate almost anything

	Small, streamlined shape makes it easy to carry
	Rugged, reliable design stands up to field use
	Easy to read measure/source screen lets you view input and output simultaneously
	Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors and transmitters
	Source mA with simultaneous pressure measurement to conduct valve and I/P tests
	Support flow meter testing with frequency and counts per minute (cpm) functions
	Perform fast linearity tests with auto step and auto ramps features
	Power transmitter during test using 24 V loop supply with simultaneous mA measurement
	Store frequently used test setups for later use
	Three year warranty

Fluke 705, 707, 707Ex and 715 loop Calibrators

For more information:
Click here >>

Complete family of volt/mA calibrators.

Fluke 707 and 705
Two power full models to choose from

	Innovative output adjustment dial on 707 provides 1 na and 100 na resolution and one hand operation
	Large display and simple interface for easy of use
	Simultaneous ma and % readout for quick, easy interpretation of readings
	Ma accuracy of 0,015% o the fluke 707 and 0,02 on the 705
	HART mode on 707 connects 250 ohm resistor in series with 24 V loop for compatibility with HART communicators
	Pushbutton 25 % steps for last, easy linearity checks
	Span checks for fast confirmation of zero and span
	Selectable slow and fast linear step ramp provide ramping outputs for valve slewing, remote testing and loop functional tests
	24 V internal loop supply, so you can power and read a transmitter at the same time without carrying a DMM
	0-20 mA or 4-20 mA default start-up modes

Fluke 707Ex plus certification safe loop calibrator

All the great features of the plus certification in accordance with the ATEX directive (ex II 2 G EEX ia IIC T4) and factory mutual W>I class 1, Div.2 groups AD.

Fluke 715 Volt/mA Calibrator

	Source voltage 1o 100mV or 10 V
	Measure loop current (0-20mA, 4-0 mh) signal with 0.015% accurasy dengan 1 Micro Ampere resolution
	Measure voltage output process signals from PLCs, transmitter
	Source or simulate 24mA loop current
	24 V loop supply with simultaneus curret measurement

Page 4 of 6| [1][2][3][4][5][6]