Main Advantages

Application

Printed Circuit Board          Electronics

Semiconductor                   Precision Parts

Robotic and Automotive     Packaging

Handling System

Main Advantages

Application

Printed Circuit Board          Electronics

Semiconductor                   Precision Parts

Robotic and Automotive     Packaging

Handling Syste

Main Advantages

Application

Printed Circuit Board          Electronics

Semiconductor                   Precision Parts

Robotic and Automotive     Packaging

Handling System

Max. vacuum level    : VTOX pump -93kpa(-697.5mmHg)
                               : VTOM PUMP -85kpa(-637.5mmHg)
Max. flow rate           : VTOX pump 32 NI/m x N stack
                               : VTOM pump  35NI/m X N stack
Supply air pressure   : 4-6bar, max.7bar
Supply air type         : Dry compressed air
Working temperature : -20℃ to +80℃
Noise level                : 50 - 65dBA 

This oneline model uses individual pumps to make up the complete unit, each pump is in itself a multi stage ejector unit. Each individual pump can be stacked to together thus creating a modular manifold based system.The advantages of this unit is that it can be operated using just two control valve(as to vacuum and equal vacuum release time to each vacuum pads)whilst retaining individual vacuum lines separate to one another, therefore if any leakage or surface deformation occurs and one pad loses it vacuum, it does not effect the vacuum level in the other pads. Also, it can be used vacuum port for purging work filter cleaning function. It will be achieved long life time vacuum filter & pump. Pumps can be stacked up from 4-16unit depending upon requirements. The pumps can have seal material options of Viton & EPDM for corrosive and acidic applications.

This M-Minimultiple model uses individual pumps to make up the complete unit, each pump is in itself a multi stage ejector unit. Each individual pump can be stacked to together thus creating a modular manifold based system.

The advantages of this unit is that it can be operated using just one control valve whilst retaining individual vacuum lines separate to one another, therefore if any leakage or surface deformation occurs and one pad loses it vacuum, it does not effect the vacuum level in the other pads. Pumps can be stacked up from 2 - 16 unit deending upon requirements.

The pumps can have seal material options of Viton & EPDM for corrosive and acidic applications.

Max. vacuum level     :  -85kpa(-637.5mmHg)
Max. flow rate            :   35NI/m X N stack
Supply air pressure  :  4-6bar, max.7bar
Supply air type          :  Dry compressed air
Working temperature :  -20℃ to +80℃
Noise level                :  50 - 65dBA

Basically this pump is similar function with mini multiple stack pump. Each individual pump can be stacked up thus creating a modular manifold based system. The advantages of this unit is that it can be operated with one supply air port and activating individual vacuum pump which mounted on the manifold, as the result if occur any leakage or surfae deformation of one vacuum pad, it does not effect the vacuum performance in other vacuum pads. This pump can be stacked up from 2 stack to 6 stacks, depending on the requirement. This pump has sealing option of VITON and EPDM for corrossive and acidic application. Also, can be integrated vacuum filters directly on the pumps.

M-Duplex pump is similar to the block type type in that it uses the components of the mini type multi stage vacuum pump. The pumps are mounted onto a dual station manifold. This manifold enables compact and simple installation. The manifold can accommodate two VTM30 pumps thus producing a VTM60, which gives high flow rates in a compact format. A vacuum switch can be ordered with the unit which piggy backs one of the pumps again for compact and easy installation. There is an option for mounting the exhausts one either side or both on one end of the manifold. There is also the option of connecting vacuum and air supply connections on either side of the manifold block, vacuum connections are 1/2" BSPX2.

Max. vacuum level       :  -85kpa(-637.5mmHg)
Max. flow rate              :   390NI/m (23.4㎥/hr)
Supply air pressure    :  4-6bar, max.7bar
Supply air type            :  Dry compressed air
Working temperature :  -20℃ to +80℃
Noise level                   :  57 - 65dBA

This MM-Midiflex pump is a compact manifold based multistage ejector multi pump arrangement.  Much higher flow rates and fast evacuation times can be achieved with this type of pump.
The pump features a pressure gauge and a vacuum gauge along with two 3/4 BSP ports for connecting more than one large bore vacuum pipe. As with most of the other pumps the MM-Midiflex can be specified with an air saving kit, and with VITON or EPDM as seal options. As specials this manifold can be used for mixing. The pumps to achieve a combination of high flow rates and the highest vacuum levels.

The largest compressed air-driven vacuum pump on the market place, that is comparatively compact and light weight.This pump mainly for the application wherever larger air volume to be evacuated or to compensate for the leakage flow must remarkable application for this pump will be in conveying system for granules, transferring bulk materials and gauge and mechanical on/off valve as standard.Air saving kit, solenoid valve, non-return valve, and with VITON or EPDM as seal options.

Max. vacuum level       :  -92kpa(-690mmHg)
Max. flow rate             :   14460NI/m (867.6㎥/hr)
Supply air pressure     :  4-6bar, Max.7bar
Supply air type           :  Dry compressed air
Working temperature  :  -20℃ to +80℃
Noise level                 :  68 - 76 dBA

VTRA Pump

This is a series of adjustable flow rate single stage vacuum pumps particularly good for use in high contamination areas where dust and small debris is likely to enter the vacuum line. The design of this pump enables particles and small debris to pass directly through the pump. High flow rates can be achieved in conjuction with vacuum levels down to -84.4kpa whilst maintaining a high performance to air consumption ratio. 

Max. vacuum level       :  -84.4kpa(-633mmHg)
Max. flow rate             :   3396NI/m (203.76㎥/hr)
Supply air pressure     :  4-6bar, Max.7bar
Supply air type           :  Dry compressed air

VTRF Pump

These pumps provide a reliabel and cost effective solution for in line product transfer, particularly for transferring bulk materials, granules, continuous strips and powders. Like the VTRA the pump has a straight through design, hence they are non-clogging and maintenance free. High flows can be achieved with in line bore sizes up to 1 1/2".

Max. vacuum level       :  -33.8kpa
Max. flow rate             :  4670NI/m (280.2㎥/hr)
Supply air pressure     :  4-6bar, Max.7bar
Supply air type           :  Dry compressed air

Turtle Pump

Main advantages
● Patented design.
● High operational reliability despite fluctuating or low compressed-air pressure.
● Integrated High Dirt Holding Capacity pleated filter.
● VTEC Twofold SilencerPT assures low noise levels.
● Optional Air-Saving(AS) kit available to minimize energy consumption.
● Optional Factory installed Air control/Vacuum release vales and Vacuum switch available.
● Compact size and light weight.
● Easily mountable and interchangeable vacuum cartridge.

VTCL Series
Max. vacuum level       :  -75kPa
Max. flow rate              :  724ℓ /min
Supply air pressure    :  4-6bar, Max 7bar
Supply air type            :  Dry compressed air
Working temperature   :  -20℃ to+80℃
Noise level                  :  50~60 dBA

VTC Series
Max. vacuum level       :  -93kpa
Max. flow rate              :  688ℓ /min
Supply air pressure    :  3~6bar, Max 7bar
Supply air type            :  Dry compressed air
Working temperature   :  -20℃ to+80℃
Noise level                  :   50~60dBA

V-Pump

Main advantages
• High operational reliability despite fluctuating.
• Quick response time.
• VTEC Twofold Silencer assures low noise levels.
• Easy to distribute vacuum. (Multiple connection alternatives
• Optional Air-Saving(AS) kit available to minimize energy consumption.
• Optional factory installed air control/vacuum release valves and vacuum switch available.
• Easily mountable and interchangeable vacuum cartridge.

VS Series

Max. vacuum level       :  -93kPa
Max. flow rate              :  341NI/min
Supply air pressure    :  3~6bar, Max 7bar
Air consumption          :  97~152NI/min
Supply air type            :  Dry compressed air
Working Temp.            :  -20℃~80℃
Noise level                  :  50~60dBA

VLS Series
Max. vacuum level       :  -75kPa
Max. flow rate              :  362NI/min
Supply air pressure    :  4~6bar, Max 7bar
Air consumption          :  70~104NI/min
Supply air type            :  Dry compressed air
Working Temp.            :  -20℃~80℃
Noise level                  :  50~60dBA

Cartridge Pump

● VTEC Vacuum Cartridge is new innovated multi-stage vacuum pump
● High Vacuum flow(3 times higher)
● Working pressure ( 1.7bar ~ 6bar)
● Extremely quick response time ( about 1.5times faster)
● Maintain the vacuum in low pressure or fluctuations
● Compact size and very light weight
● Integrated into a pipe line ( eliminated leakage through pipe line)
● Easy to customize a pump design for a specific application or machine

MD-PUMP

Lightweight design of the VTEC MD-PUMP reduces the robot size requirement through direct mount on a robot-controlled gripper and improves the production time mounted close to the point of use.

VTEC PREMIUM VACUUM PUMP allows you to save the space through direct connection of middle of pipe line and it is suitable with application that is required high suction flow or large evacuating volume of air